DMC series · Pulse dust collector
After the dust-containing gas enters the dust collector, the gas-solid two-phase flow is separated on the surface of several built-in filter bags. After the gas is filtered, it is evacuated from the rear duct by the induced draft fan, and the fine particles adhering to the filter bag are struck down under the action of regular pulse cleaning gas and discharged from the discharge port along the wall of the cylinder.
1. High filtration efficiency, which can capture fine particles above 0.1μm, which can fully meet the national environmental standards for gas emissions.
2. It can be used as the terminal dust removal device after the cyclone separator, or it can be directly used as the only material collection device.
3. According to the characteristics of customer materials, special filter materials with high temperature resistance and corrosion resistance can be used, and offline sub-cavity structure can be used to ensure efficient filtration. Other filter media such as filter cartridges and sintered plates can also be used.
技術參數表(Technical Data Sheet)：
Note: The specific matching is related to the product particle size distribution, dust content, material specific gravity, etc., specific can be communicated with our engineers, non-standard models can be customized.